do88 airbox kit with AEM Dryflow air filter - Blue
OEM ref.: 12786553, 12795151, 12805268, 12786800, 12802029
Will fit:
Saab 9-3 - 2003-2011 - all versions with 1.8 and 2.0 turbo Petrol engines (B207)
The kit includes:
1 pc AEM Dryflow air filter
1 pc Full aluminium inlet pipe
1 pc Heat shield with rubbers seals
1 pc Silicone hose 70 mm (2,75")
Hose clamps and installation hardware
This kit is designed for the ones with high horsepower goals that want to upgrade to the absolute best. do88 turbo intake system has better air flow than the stock air box and intake pipe. This is verified in do88 SuperFlow SF-1020 flow bench. The included air intake pipe have an outer diameter of 70 mm (2 3/4") and are mandrel bent for best possible air flow. The pipe connects to the turbocharger inlet with an custom designed 4 PLY silicone hose designed for best air flow and then steel wire reinforced to handle a wide pressure range.
To acheive best level of function fit and looks our pipe have CNC machined bracket and air mass meter flange. The air mass meter flange are welded to a carfully selected pipe section with correct air flow cross section to maintain proper air mass meter readings.
The included heat shield are designed to create a screen between the air filter and the warm air in the engine compartment. This is done by a custom designed heat shield plate that comes with rubber seals that makes it protect your air filter from hot air better than other intake systems that can match the great flow of the do88 system! The filter are located in a position where its fed with cold air from the intake pipe from the front grille. If you want to improve the cold air flow to the filter you can replace the original air guide with a do88 air ducting hose (Part number AD89) that you can use to lead air from any preffered location in the front of the car.
do88 turbo inlet pipe has an air flow at 0,125bar/1,81psi pressure drop of 653CFM, compared to the OEM pipe and air box that has 452CFM.
Always be aware of that the OEM intake system was designed for the power level the car was built for originally. A power increase may cause your stock intake system to not perform well enough. If your intake system dont have the performance you need it will be to tough for the turbocharger to get teh air it needs which will lower engine effeciency and this will make you loose hp. So even on an engine with a software tune the do88 intake system will give a performance increase over the OEM air box and intake pipe.
OEM ref.: 12786553, 12795151, 12805268, 12786800, 12802029
Will fit:
Saab 9-3 - 2003-2011 - all versions with 1.8 and 2.0 turbo Petrol engines (B207)
The kit includes:
1 pc AEM Dryflow air filter
1 pc Full aluminium inlet pipe
1 pc Heat shield with rubbers seals
1 pc Silicone hose 70 mm (2,75")
Hose clamps and installation hardware
This kit is designed for the ones with high horsepower goals that want to upgrade to the absolute best. do88 turbo intake system has better air flow than the stock air box and intake pipe. This is verified in do88 SuperFlow SF-1020 flow bench. The included air intake pipe have an outer diameter of 70 mm (2 3/4") and are mandrel bent for best possible air flow. The pipe connects to the turbocharger inlet with an custom designed 4 PLY silicone hose designed for best air flow and then steel wire reinforced to handle a wide pressure range.
To acheive best level of function fit and looks our pipe have CNC machined bracket and air mass meter flange. The air mass meter flange are welded to a carfully selected pipe section with correct air flow cross section to maintain proper air mass meter readings.
The included heat shield are designed to create a screen between the air filter and the warm air in the engine compartment. This is done by a custom designed heat shield plate that comes with rubber seals that makes it protect your air filter from hot air better than other intake systems that can match the great flow of the do88 system! The filter are located in a position where its fed with cold air from the intake pipe from the front grille. If you want to improve the cold air flow to the filter you can replace the original air guide with a do88 air ducting hose (Part number AD89) that you can use to lead air from any preffered location in the front of the car.
do88 turbo inlet pipe has an air flow at 0,125bar/1,81psi pressure drop of 653CFM, compared to the OEM pipe and air box that has 452CFM.
Always be aware of that the OEM intake system was designed for the power level the car was built for originally. A power increase may cause your stock intake system to not perform well enough. If your intake system dont have the performance you need it will be to tough for the turbocharger to get teh air it needs which will lower engine effeciency and this will make you loose hp. So even on an engine with a software tune the do88 intake system will give a performance increase over the OEM air box and intake pipe.
Average ratings
No review